3.1.0 | - Chapter "Technical data" updated
- Chapter “Explosion protection” updated
- Chapter “Installation positions” updated
- Chapter “Explanation of CycleCounter monitoring” updated
- Chapter “Example program 4: Parameterization of the CycleCounter and watchdog behavior” updated
- Update structure
|
3.0.0 | - Chapter "Technical data" updated
- Chapter “Output protection during DC switching of inductive loads (overvoltage limitation)” updated
- Update structure
- Update revision status
|
2.9.0 | - Update chapter “Termination and topology”
- Update structure
|
2.8.2 | - Documentation for EL1264 supplemented
- Additional documentation completed for EL1262-0010
- Chapter "Product overview" renamed to chapter "Product description" and subchapters "Introduction", "Technical data", "LEDs and connection" restructured
- Subchapters "Using the SENT protocol" and "Access to TEDS" moved from the chapter "Commissioning" to the chapter "Sample programs" and summarized with the corresponding samples
- Chapter "Mounting and wiring" supplemented with subchapters "Note on power supply" and "Disposal"; subchapter "Connection technology" updated, renamed subchapter "Connection"
- All subchapters "Technical data" in the chapter "Product description" updated
- "Guide through the documentation" supplemented in the foreword
- Subchapter "Version identification of EtherCAT devices" (foreword) updated, addition of subchapters
- "General notes on marking"
- "Version identification of EL terminals"
- "Electronic access to the BIC (eBIC)"
- Additions to the chapter "Commissioning" with subchapters:
- "Notes on EL1262-0010"
- "Sensitivity of the input"
- "Explanation of CycleCounter monitoring"
- "Explanation of the output behavior in case of error (Watchdog, CycleCounter)"
- Addition to chapter "Firmware update EL1262-0010" (Appendix)
|
2.7 | - Addition to chapter “Sample programs”
- Structure update
|
2.6 | - Addition to chapter "Sensitivity of the input"
- Structure update
|
2.5 | - Update chapter "UL notes"
- Update chapter "Technical data"
- Structure update
|
2.4 | - Chapter Commissioning/Sample programs: "Sample 3: Reading and writing TEDS data" supplemented
|
2.3 | - Chapter "Using the SENT protocol with EL1262-0050" incl. sample program (2) supplemented in the chapter "Commissioning"
|
2.2 | - Update chapter "Notes on the documentation"
- Update Technical data
- Chapter "Installation instructions for enhanced mechanical load capacity" added
- Update chapter "TwinCAT 2.1x" -> chapter "TwinCAT development environment" and chapter "TwinCAT Quick Start"
|
2.1 | - Chapter "Oversampling terminals and TwinCAT Scope" supplemented
|
0.1 – 2.0 | *archived* |