ID 22019
Deselection of face machining during active contour rotation not permitted. | |||
Description |
| ||
Response | Class | 2 |
|
Solution | Class | 3 |
|
Error type | 1, Error message from NC program. | ||
| |||
TF5xxx - Motion · 0 次阅读
TF5xxx - Motion · 0 次阅读
Deselection of face machining during active contour rotation not permitted. | |||
Description |
| ||
Response | Class | 2 |
|
Solution | Class | 3 |
|
Error type | 1, Error message from NC program. | ||
| |||