Diag Messages
Further Information
- 0001, No errors
- 4101, Device temperature reached critical level
- 4107, Output voltage is below DC-OK level.
- 4418, Powersupply short circuit. Automatic restart is done.
- 441F, Powersupply I2T level exceeded II %%
- 4618, Grid phase LII missing. Output power reduced
- 8104, Overtemperature (SS side)
- 810E, Powersupply output overvoltage
- 810F, Powersupply short circuit. Manual reset required
- 8137, CRC of FoE parameter file failed
- 8144, Hardware fault (II)
- 81B2, FoE parameter file data missing
- 81B3, File version of FoE parameter file does not fit to firmware
- 81B4, PCB HW index does not fit to given PCB index in FoE parameter file
- 82FF, Bootmode prohibited when the output is activated.
- 841D, Auxilliary voltage is too low
- 8444, I2T model overload