Infosys在阅读器中打开 / AI 翻译

AX8000 | Multi-axis servo system · 0 次阅读

Module connection

Module connection 1:

The connection of the individual modules in a drive system takes place via the grounding hangers [1]. These are each mechanically locked to the right-hand earthing bolt of the module and swiveled onto the left-hand earthing bolt of the adjacent module, where they are mechanically locked by the nuts and serrations.


Module connection 2:
►Push the grounding hanger [1] onto the earthing bolt [2] of the right-hand module
►Make sure that the opening in the grounding hanger [1] is facing upwards


Module connection 3:
►Screw the nut [3] onto the earthing bolt [2] on top of the grounding hanger [1]
►Do not use a spring washer [4]


Module connection 4:
►Swivel the grounding hanger [1] onto the earthing bolt [5] of the left-hand module


Module connection 5:
►Screw the nut [6] onto the earthing bolt [5] on top of the grounding hanger [1]
►Do not use a spring washer [7]
►Tighten both nuts firmly
►Observe tightening torques:

Components

Tightening torque [Nm]

Serrated hexagonal nut
M5, strength class A2-50

2.7


Module connection 6:
►Mount [8] further grounding hangers