Type key AMP80xx, AMP85xx

AMP8

Distributed Servo Drive

a

Series

• 0 = standard
• 5 = increased mass moment of inertia

b

Flange size F

• 3 = F3
• 4 = F4
• 5 = F5

c

Overall length

• 1
• 2
• 3
• 4

d

Winding code

A to Z

• S = special winding

e

Shaft version

• 0 = smooth shaft
• 1 = shaft with groove and parallel key according to DIN 6885
• 2 = shaft with radial shaft sealing ring IP65 and smooth shaft
• 3 = shaft with groove and parallel key according to DIN 6885
• 4 = shaft with radial shaft sealing ring IP65, smooth shaft and sealing air connection
• 5 = shaft with radial shaft sealing ring IP65, groove, parallel key and sealing air connection

f

Feedback system

• 1 = single-turn absolute encoder, resolution 24-bit, TwinSAFE STO,/SS1
• 2 = multi-turn absolute encoder, resolution 24-bit, TwinSAFE STO/SS1
• 3 = single-turn absolute encoder, resolution 24-bit, TwinSAFE Safe Motion
• 4 = multi-turn absolute encoder, resolution 24-bit, TwinSAFE Safe Motion

g

Holding brake

• 0 = without holding brake
• 1 = with holding brake
• 2 = with holding brake and M8 plug for manual brake release