Infosys在阅读器中打开 / AI 翻译

EL7062 | 2-channel stepper motor interface with incremental encoder · 0 次阅读

Notes on Diag Messages associated with Motor Terminals

Notes on Diag Messages associated with Motor Terminals 1:

„Ack. Message“ Button

The ‚Ack. Message’ button has no effect on the Drive State Machine of the Motor terminals, pressing the button does not make an axis reset.
The Drive State Machine has no influence on the error list, an axis reset also does not remove any entries from the error list, however, this can be done by pressing the ‚Ack. Message’ button.