Process image
The KL2751 and KL2761 appear in the complex process image with 3 bytes of input data and 3 bytes of output data. These are organized as follows:
Byte offset (without word alignment) | Byte offset (with word alignment*) | Format | Input data | Output data |
|---|---|---|---|---|
0 | 0 | Byte | SB | CB |
1 | 2 | Word | DataIN | DataOUT |
The KL2751 and KL2761 appear in the compact process image with no input data and 2 bytes of output data. These are organized as follows:
Byte offset (without word alignment) | Byte offset (with word alignment*) | Format | Input data | Output data |
|---|---|---|---|---|
0 | 0 | Word | - | DataOUT |
*) Word alignment: The Bus Coupler places values on even byte addresses
Legend
SB: Status byte
CB: Control byte
DataIN: Input data word
DataOUT: Output data word
Process data
-
DataOUT
In process data mode the output word DataOUT controls the output power of the dimmer terminal.
Valid values are 0dec to 32767dec.
-
DataIN
In process data mode the input word DataIN contains the internal temperature of the dimmer terminal in degrees Celsius (KL2751/KS2751: only with firmware version 3B or higher)