Diagnosis
If the realtime cycle function is activated, information about the realtime cycles is also output in order to generate diagnosis data.
Example
Example of diagnosis data
PATH : REALTIME CYCLES DIAGNOSIS DATA CHANNEL NO.: 1
===============================================================
Note:
Some messages may be hidden in the diagnosis.
Please refer to the realtime cycle documentation to find out how to influence the diagnosis.
Timestamp Level Message
---------------------------------------------------------------
50024 INFO Realtime cycle manager was initialised
50024 INFO Realtime cycle manager: 0 cycles
426098 INFO Cycle 1 was created with PROG validity
426098 INFO Cycle 1 was started
...
Every line is provided with a diagnosis level. The user can influence the output by using the realtime variable V.RTG.CYCLES.DIAG_LEVEL. The higher the variable value, the more information is output. The following diagnosis levels can be set.
Value | Description |
0 | No diagnosis data. |
1 | Errors from realtime cycles are output. |
2 | Warnings that may indicate a problem. |
3 | Information on managing realtime cycles, default. |
4 | Information about realtime cycle actions. |
All information about levels 0 to 3 are output with the value preset to V.RTG.CYCLES.DIAG_LEVEL = 3.
Programming Example
Setting diagnosis level
; Set diagnosis very high
; All information is output
V.RTG.CYCLES.DIAG_LEVEL = 99
; Define realtime cycle
#RT CYCLE [SCOPE = PROG]
; Actions
; ...
#RT CYCLE END
; ...
; End main program
M30