Generation process
Minimum requirements for using McCOM assistants
- TwinCAT3 Version 4024
- Microsoft Visual Studio 2019 Professional/Enterprise: During installation, additionally select the option “Desktop development with C++”.
The transformation is generated using a WinCAT3 template
Execute the following steps:
- Create or open a TwinCAT3 XAE project with integrated CNC configuration
- Create the scope for transformation using templates as shown in the example below.
- Generate user C++ code for transformation (this step can also take place later but then a new driver must also be generated)
- Generate driver (MyTrafo.sys)
- Integrate the transformation into the XAE project Configuration as TcCOM object
- Activating the configuration
 | The MyTrafo.sys driver is copied automatically to the <TwinCAT>\3.1\Driver\Autoinstall directory when the configuration is activated. |