Infosys在阅读器中打开 / AI 翻译

EL5042 | 2 Channel BiSS-C Interface · 0 次阅读

Setting the encoder supply voltage

The EL5042 provides 5 V and 9 V encoder power supply (0x80p8:12 supply voltage) for both channels with max. 0.5 A.

Setting the encoder supply voltage 1:

Setting the encoder supply voltage

  • Condition: To write 0x8008:12 “Supply Voltage”, the value 0x72657375 (ASCII: “user”) must be set in 0xF008 “Code word”.
  1. Set the value into index 0x8008:12 “Supply Voltage” (Specification in steps of 0.1 V).
    Only the values 50 (5.0 V) and 90 (9.0 V) are permissible.
    This setting applies to both channels.
  2. Before switching to 9.0 V make sure that both BiSS encoders support the extended voltage range!
  3. The setting is only adopted in the “INIT” state.
  • The encoder supply voltage is set for both channels in object 0x8008:12!