1.8 | - Updates to “Basics of sensor technology“ / “Basic principles of RTD technology“ subchapters
- Subchapter “Overview of common resistance sensors“
- Subchapter “Overview implemented RTD transformations“
- Addenda to subchapters within “Notes on analog data values” chapter
- “Measurement of differential signals with high common-mode offset”
- “Bandwidth, sampling rate and impedance of the measurement inputs”
- “Influence of the mains frequency 50/60 Hz”
|
1.7 | - Update to subchapter “Basics of sensor technology“/ “Basic principles of RTD technology“ /“Overview implemented RTD transformations“ (NTC-RTD values updated/ coefficients for the Steinhart-Hart equation added)
- Updates to subchapter “Notes on analog data values“ / “Notices on analog specifications“
- Subchapter “Ground reference: single-ended/differential typification“ (explanation/ differential)
- Subchapter “Explanation of the term GND/Ground“
|
1.6 | - Additions to the chapter "Product overview measurement technology" with subchapter "Shunt measurement"
- Addition to the chapter "Notes on analog data values"
- Subchapter "Shunt measurement" added
- Update/addition in the subchapter "Notes on analog specifications"/ "Notes on analog data values"
- Subchapter "Impedance data" added
- Subchapter "Temporal aspects of analog/digital or digital/analog conversion" updated
- Updates in the chapter "Notes on analog data values", subchapter "Analog information - shield and earth"
- Section "FE/shielding, basic measures and information"
- Section "Practice-oriented diagnostic methods for system examination"
|
1.5 | - Update in chapter "Notes on analog data values", subchapter "Notes on analog specifications"/ "Dielectric strength"
- Addition to the chapter "Notes on analog data values" with subchapter "Repeatability"
|
1.4 | - Subchapter "Power supply" added to chapter "Product overview measurement technology strain gage, TC, RTD" (supplemented to "Product overview measurement technology strain gauge, TC, RTD, power supply")
- Subchapters "RTD/resistance measurement" and "Measuring bridges, strain gauges" updated in chapter "Product overview measurement technology strain gauges, TC, RTD, power supply"
- Subchapter "Operation of inductive/capacitive loads on analog outputs" added to chapter "Notes on analog data values"
|
1.3 | - Updates in the chapter "Product overview measurement technology strain gauge, TC, RTD":
- Subchapter "Thermocouple (TC)"
- Subchapter "RTD/resistance measurement"
- Update in chapter "Basic considerations on analog technology", subchapter "What else needs to be considered..."
- Subchapters "Explanations on galvanically (un)isolated channels" and "On the mutual influence of non-isolated differential channels" in the chapter "Notes on analog data values" combined as a new subchapter "Galvanically (un)isolated channels" (title of the subchapter shortened to "Explanations")
- Subchapter "Wiring of differential current inputs" added to chapter "Notes on analog data values"/ "Galvanically (un)isolated channels"
- Update in chapter "Notes on analog data values", subchapter "Galvanically (un)isolated channels"/ "On the mutual influence of non-isolated differential channels"
- Subchapter "Safety instructions" (foreword) updated
|
1.2 | - Chapter “Product overview: Measurement technology strain gauge, TC, RTD” updated
- Chapter "Basics of sensor technology", subchapter "Basics of strain gauge technology", section "Measuring body and natural frequency" updated
- Changes in the chapter "Notes on analog data values"
- Subchapter "Signal quality when outputting signals with digital analog outputs – distortion factor" added
- Subchapter "Readjusting the specification" updated
- Chapter "What else needs to be considered..." moved to the chapter "Basic considerations on analog technology"
|
1.1 | - Chapter "Basic considerations on analog technology" updated
- Refer to the chapter "Analog information - shield and earth" updated
|
1.0 | |