Infosys在阅读器中打开 / AI 翻译

EL4374 | EtherCAT Terminal, 2-channel analog input + 2-channel analog output, multi-function, ±10 V, ±20 mA, 16 bit, 2 ksps · 0 次阅读

Fast commissioning

The analog channel is set ready for operation ex factory with default settings for 10 V measurement and FloatingPoint PDO (Real32). Experienced users can read immediately by:

  • Scan the terminal in TwinCAT (or add it manually in the configuration, paying attention to the EtherCAT Revision!)
  • Reload in TwinCAT

the measured value (here: 4.233 V on channel 1) and link it to the PLC.

Fast commissioning 1:Fig.148: Reading the measured value

To gain a deeper understanding of the capabilities of this device, it is recommended that you read the following sections.