Address switch settings

Via the address switch you can select between different addressing options and assign the PROFINET name.

Note

The device is PROFINET-compliant if switches x10 and x1 are set to 0xEx or > 0xF1.

All other modes are available as options.

PROFINET name via switch

This is where the name "il230x-b903-xx" is formed. xx corresponds to the switch setting. "il" is must be lower case!

Hex switch x16	Hex switch x1	Description	Restart behaviour	Behaviour with factory settings
0x0 - D	0x0 - F	IP address via switch	- PN name from memory - IP address via switch	- PN name becomes empty string - IP address via switch 172.16.18.xxx (xxx switch) SNM 255.255.0.0
0xF	0x0	IP address via DHCP	- PN name from memory - IP address and SNM via DHCP	- PN name becomes empty string - IP address and SNM via DHCP
0xF	0x1	IP address via BootP	- PN name from memory - IP address and SNM via BootP	- PN name becomes empty string - IP address = 0.0.0.0, - SNM = 0.0.0.0
0xE	0x0 - F	PN name via switch x1	- PN name via switch* (il230x-b903-xx, with xx = 0...15) - IP address from memory	- PN name via switch - IP address = 0.0.0.0, - SNM = 0.0.0.0
0xF	0x2 - F	PROFINET-compliant	PN name from memory - IP address from memory	- PN name becomes empty string - IP address = 0.0.0.0, - SNM = 0.0.0.0

*) The PROFINET name cannot be overwritten by the controller.

PN - PROFINET
SNM - SubNetMask
DHCP - Dynamic Host Configuration Protocol
DNS - Domain Name Server