- AX5000 | Diagnostic Messages - Version 3.7
- Parameter channel diagnostics
Parameter channel diagnostics
Further Information
- 1001, No valid IDN
- 1009, Invalid access to element 1
- 2001, No name
- 2002, Name transmission too short
- 2003, Name transmission too long
- 2004, Name cannot be changed, (read only)
- 2005, Name is write protected at this time
- 3002, Attribute transmission too short
- 3003, Attribute transmission too long
- 3004, Attribute cannot be changed, read only
- 3005, Attribute is write protected at this time
- 4001, No Unit
- 4002, Unit transmission too short
- 4003, Unit transmission too long
- 4004, Unit cannot be changed, read only
- 4005, Unit is write protected at this time
- 5001, No minimum input value
- 5002, Minimum input value transmission too short
- 5003, Minimum input value transmission too long
- 5004, Minimum input value cannot be changed, read only
- 5005, Minimum input value is write protected at this time
- 6001, No maximum input value
- 6002, Maximum input value transmission too short
- 6003, Maximum input value transmission too long
- 6004, Maximum input value cannot be changed, read only
- 6005, Maximum input value is write protected at this time
- 7002, Operation data value transmission too short
- 7003, Operation data value transmission too long
- 7004, Operation data value cannot be changed, read only
- 7005, Operation data value is write protected at this time
- 7006, Operation data value is smaller than the minimum input value
- 7007, Operation data value is greater than the maximum input value
- 7008, Invalid operation data
- 7009, Operation data is write protected by a password
- 700A, Operation data value is write protected
- 700B, Invalid indirect addressing
- 700C, Operation data is write protected due to other settings
- 700D, Reserved
- 7010, Procedure command already active
- 7011, Procedure command not interruptible
- 7012, Procedure command is at this time not executable
- 7013, Procedure command not executable
- 7014, No data state
- 8001, No default value
- 8002, Default value transmission too long
- 8004, Default value cannot be changed, read only
- 800A, Invalid drive number
- 800B, General error
- 800C, No element addressed