Introduction
8-channel digital input, 24 VDC, 10 µs, ground switching, M8
The EPP1098-0001 EtherCAT P Box with digital inputs acquires ground switching, binary control signals from the process level and transfers them electrically isolated to the controller. The signal state is displayed by LEDs; the signal connection is established via screw-type M8 connectors.
The sensors are supplied from the control voltage US. Power is supplied via an internal, short-circuit proof driver module with a total of 0.5 A for all sensors.
Thanks to the input filter of 10 µs, the EPP1098-0001 is preferably suitable for electronic inputs that transmit to the controller with the shortest possible delay due to the short filter time.