E_PersistentMode
Mode in which the persistent data should be written. This data type is used by the function block: FB_WritePersistentData.
TYPE E_PersistentMode :
(
SPDM_2PASS := 0,
SPDM_VAR_BOOST := 1
);
END_TYPEValue | Meaning |
|---|---|
SPDM_2PASS | All data are from the same cycle |
SPDM_VAR_BOOST | Data of individual persistent variables are from the same cycle |
Requirements
Development environment | Target platform | PLC libraries to be integrated (category group) |
|---|---|---|
TwinCAT v3.1.0 | PC or CX (x86, x64, Arm®) | Tc2_Utilities (System) |