- IPxxxx-B520 DeviceNet
- DeviceNet Objects
- IP Config Object
IP Config Object
The coupler provides the vendor specific object class to access its status, diagnostic and configuration data. Within the IP Config Object the full range of Registers and Status-Information of the IPxxxx and the channels is accessible.
Class Code: 100 (64hex)
Class Attributes
Attribute ID | Access Rule | Name | Data Type | Description | Semantics of Value |
|---|---|---|---|---|---|
1 | Get | Revision | UINT | Revision of implementation | 1 |
2 | Get | Max. Instance | UINT | Max. number of instances | 1 |
Instance Attributes
Attribute ID | Access Rule | Name | Data Type | Description | Semantics of Value |
|---|---|---|---|---|---|
1 | Get/Set | Terminal | USINT | Number of terminal | 0: Coupler >0: Channels |
2 | Get/Set | Table Number | USINT | Number of table | See IPxxxx /Channel Description |
3 | Get/Set | Register Number | USINT | Number of Register | See IPxxxx /Channel Description |
4 | Get/Set | Register Data | DWORD | Register Value | See semantics |
5 | Get | IP-Status | BYTE | Status of the IPxxxx | See semantics |
6 | Get | Channel Status | WORD | Status of the Ipxxxx Channel | See semantics |
10 | Get/Set | IO Error Action | BYTE | Action to be performed if a fieldbus error occurs | see semantics |
15 | Get | Input Size Poll Mode | BYTE | Number of Bytes produced via the Poll mode |
|
16 | Get | Input Size Bit Strobe Mode | BYTE | Number of Bytes produced via the Bit Strobe mode |
|
17 | Get | Input Size COS / Cyclic Mode | BYTE | Number of Bytes produced via the Change of State / Cyclic mode |
|
18 | Get | Output Size Poll / COS/ Cyclic Mode | BYTE | Number of Bytes consumed via the Poll / Change of State /Cyclic mode |
|
25 | Get/Set | Bus Off | BYTE | Behavior of IPxxxx-B520 after detection of a Bus-Off event | see semantics |