2.0.1 | - IP4112-Bxxx, IE4112 updated
|
2.0.0 | - UL notes extended
- Nut torque for connectors added
- Accessories extended
- Technical data updated
- IP-Link LED diagnostic display updated
|
1.9.1 | |
1.9.0 | - Introduction and signal Connection of IE2808 updated
- Special type IE2808-0001 added
- Block diagram of IP/IE5109 updated
- Mounting instructions for ZS1022 added
|
1.8.1 | - Mapping of IP5209 corrected
- Description of feature registers for IP/IE3312 updated
|
1.8.0 | - Extension Box IE2403added
|
1.7.4 | - IL230x-B110 added at the dimensions chapter
- Third party products chapter updated
|
1.7.3 | - Mapping of IE2808 corrected
|
1.7.2 | - Technical Data of IE2808 updated
- Block diagram of IE2808 corrected
|
1.7.1 | - IP/IE1502, Gate-Input is mapped to the Status-Byte
|
1.7.0 | - Extension Box IE2808 added
- Mounting Rail ZS5300-0001 added
- IP-Link Direct Connector added
|
1.6.2 | - Diagnostic Chapter enhanced
|
1.6.1 | - Technical Data of Fieldbus Box Modules updated
- Minor routine corrections (typing errors, orthography etc.)
|
1.6.0 | - Register settings IP/IE5009 corrected
- Minor routine corrections (typing errors, orthography etc.)
|
1.5 | - Numbering of channels at the mapping descriptions adapted to display in TwinCAT and KS2000
- Minor routine corrections (typing errors, orthography etc.)
|
1.4 | - Description of the mappings extended for Ethernet
|
1.3 | - Expanding of the specification for IP-Link up to 15 meters
- Chapter about IP-Link completed and over-worked
- Description of IP/IE3202 register settings corrected
|
1.2 | - Description of control und status bytes for all modules over-worked
- Description of mappings and configuration for the IP/IE2512 and IP/IE5009 modules updated
|
1.1 | - Description of the mappings adapted to the view of the registers in KS2000 Configuration Software
|
1.0 | - more Fieldbus Box Modules added
|
0.8 | - first preliminary Version
|