ID 21987

Feed factor is out of permissible value range.

Description

An external path feed can be commanded via the PLC. In the NC program, this can be additionally weighted by a feed factor with #FF in [%] . The programmed feed factor here exceeds the permissible value range.

Response

Class

2

Abort NC program processing.

Solution

Class

7

Check and modify NC program. Program a feed factor within the permissible data range.

Parameter

%1:

Error value [%]

%2:

Lower limit value [%]

%3

Upper limit value [%]

%4

%5

Error type

1, Error message from NC program.