EP3162-0002
The EP3162-0002 has one M12 socket per channel.
Electrical isolation
- The channels are electrically isolated from one another.
- Each channel is electrically isolated from all other potentials in the box.
See chapter Electrical isolation of the channels.
Supply voltage for sensors
An isolated voltage 24 VDC is output at pin 1. You can use this voltage as supply voltage for active sensors.
 | EMC shield clamp Depending on the application, it may be necessary to connect the shield of the sensor cables to the signal inputs of the box using ZB8513-0002 shield clamps. See chapter: ZB8513-0002 | EMC shield clamp on earthing tapes. |