Infosys在阅读器中打开 / AI 翻译

EL4374 | EtherCAT Terminal, 2-channel analog input + 2-channel analog output, multi-function, ±10 V, ±20 mA, 16 bit, 2 ksps · 0 次阅读

Fast commissioning

The analog channel is set ready for operation ex factory with default settings for the 10 V output and FloatingPoint PDO (Real32). Experienced users can read immediately by:

  • Scan the terminal in TwinCAT (or add it manually in the configuration, paying attention to the EtherCAT Revision!)
  • Reload in TwinCAT

Put into operation and output a value via OnlineWrite/OnlineForce or linked to the PLC:

Fast commissioning 1:Fig.190: Output of 4.256 V on channel 1

To gain a deeper understanding of the capabilities of this product, it is recommended that you read the following sections.