EL7062 | 2-channel stepper motor interface with incremental encoder · 0 次阅读

Differences compared with Tc2_Mc2

Tc2_Mc2 is the PLC library used for the operation of EL7062 with TwinCAT NC.

The function blocks of the Tc3_DriveMotionControl library have a similar structure to that of Tc2_Mc2. However, Tc3_DriveMotionControl differs from Tc2_Mc2 in the following points:

It is mandatory to specify values for the accelerations because there are no default values.
"After-triggering functions" are not supported. Therefore there is no "BufferMode".
MC_Home has no input "bCalibrationCam". The settings for homing are located in the CoE object 0x8n61 "DMC Features Ch. n".