Special settings for spindles
 | The parameter described in this chapter will be required for axes of axis- type "ACHSTYP_SPINDEL" interpolated by a spindle interpolator. |
Further Information
- Restriction of direction of rotation (P-AXIS-00224)
- Definition of preferred direction of rotation (P-AXIS-00031)
- "Speed-value attained" tolerance band (P-AXIS-00217)
- Special axis positions (P-AXIS-00017)
- Limiting velocity for the measuring system (P-AXIS-00220)
- Limit for spindle speed "zero" (P-AXIS-00216)
- Reverse of sign for setpoint and actual value (P-AXIS-00159)
- Switch to velocity controlled mode (P-AXIS-00265)
- Switch back to position control (P-AXIS-00266)