ID 21932

Angle programming, selection of chamfers/roundings not allowed, since disabled with channel parameter "disable_chamfers_roundings".

Description

Programming the commands #ANG, #CHR, #CHF and #RND (Contour path programming) is not possible if the channel parameter disable_chamfers_roundings (P-CHAN-00273) is set.

It is also not possible to use the commands G301 and G302.

Response

Class

2

Abort NC program processing.

Solution

Class

3

Modification of NC program or disable the channel parameter P-CHAN-00273.

Error type

1, Error message from NC program.