Cabling

Guidelines

Follow these guidelines to ensure IP67 protection:

Mount plugs with the torque values specified below. Use a torque wrench, e.g. Beckhoff ZB8801.
Seal unused connectors with protective caps.
Ensure the correct seating of pre-assembled protective caps.
Protective caps are pre-assembled at the factory to protect connectors during transport. They may not be tight enough to ensure IP67 protection.

Note

Risk of confusion: Inputs and outputs

Defects possible due to mixing up of inputs and outputs. The connectors of the inputs and outputs are of the same type.

Name	Connector type	Tightening torque	Function
X01	M12	0.6 Nm	Analog inputs
X02	M12	0.6 Nm	Analog inputs
X03	M12	0.6 Nm	Analog outputs
X04	M12	0.6 Nm	Analog outputs
X50	M8 socket, p-coded	0.4 Nm	EtherCAT P input
X51	M8 socket, p-coded	0.4 Nm	EtherCAT P downstream connection

Further Information