ID 21509
In NC block #ADD must be the last NC command. | |||
Description | Other NC commands (e.g. G functions, axis positions, variables, etc.) can be programmed in the NC block before the command #ADD [...] but not after it. | ||
Response | Class | 2 | Abort NC program processing. |
Solution | Class | 3 | Check and modify NC program.. Change the sequence of commands in the NC block so that #ADD [...] is always the last command in the sequence.
Example: Wrong:
% main
N10 G00 X0 Y0 Z0
N20 X100 #ADD["ID123"] Y200
N30 Z100
:
N1000 M30
Correct:
% main
N10 G00 X0 Y0 Z0
N20 X100 Y200 #ADD["ID123]
N30 Z100
:
N1000 M30
|
Error type | 1, Error message from NC program. | ||
| |||