ID 70367
Tool change with changing gear ratio not permitted for gantry axes. | ||||
Description | Replacing a tool with a gear stage (automatic gear changes in position controller, [TOOL// Section: Dynamics and gear data] is not permissible for gantry axes. | |||
Response | Class | 7 | Closed-loop controlled axis stop | |
Solution | Class | 6 | Correct the NC program | |
Parameter | %1: | Logical axis number [-] | ||
Logical axis number P-AXIS-00016 of concerned axis. | ||||
%2: | Current value [-] | |||
Operation mode P-AXIS-00015 of axis affected. | ||||
Error type | - | |||
| ||||