ID 310024

Before activating distance control the command height must be specified.

Description

Before distance control is activated in “surface” mode, specify the command height of the workpiece surface SET_POS.

Example of axis-specific distance control:

See: [FCT-M3//Specifying the workpiece surface]

Example of 3D distance control:

Response

Class

7

Controlled halt of the axis, the control loop is closed.

Solution

Class

6

Check and modify the NC program; set the command height before or on activating distance control.

Parameter

%1:

Logical axis number [-] or Logical channel number [-]

Logical axis number P-AXIS-00016 of the axis affected for axis-specific distance control,
logical channel number P-CHAN-00400 for 3D distance control.

%2:

Block number [-]

Block number in the NC program

Error type

-